Publicité
Les langues disponibles
Les langues disponibles
3.2.2 IOBM
The IOBM is packaged on pallets; movement from the transport device to the installation
location (or storage) is carried out using a forklift or a pallet truck.
The device has a heavy weight.
➢ During transport of the device avoid overturning.
➢ The cabinets must always be transported erect.
➢ During loading and unloading manoeuvres, always comply with the instructions
relating to the centre of gravity of the device, marked on the packaging.
For movements of the IOBM before final positioning, you are advised not to move it from the
wooden pallet on which it is fixed, to avoid any risks of overturning. Before positioning, remove
the IOBM from the pallet, removing the fixing brackets.
For movement, you must remove the covers of the front and rear plinths and insert the forks of
the forklift. The IOBM can be moved from the front, based on the spaces available, as displayed
in the following figure.
Figure 4 - Movement of the UPS KEOR XPE – IOBM
28
OMAF9212 REV. A
Installation and start-up of KEOR XPE UPS
Installation et démarrage de l'ASI KEOR XPE
Installazione e avviamento KEOR XPE UPS
Publicité
Chapitres
