Publicité
Les langues disponibles
Les langues disponibles
Installation et démarrage de l'ASI KEOR XPE
3.2
UPS MOVEMENT
3.2.1 POWER UNIT
The units are packaged on pallets; movement from the transport device to the installation
location (or storage) is carried out using a forklift.
The device has a heavy weight.
➢ During transport of the devices avoid overturning.
➢ The cabinets must always be transported erect.
➢ During loading and unloading manoeuvres, always comply with the instructions
relating to the centre of gravity of the device, marked on the packaging.
For movements of the Power Units before final positioning, you are advised not to move it from
the wooden pallet on which it is fixed, to avoid any risks of overturning. Before positioning,
remove the power unit from the pallet, removing the fixing brackets.
For movement, you must remove the covers of the front and rear plinths and insert the forks of
the forklift. The Power Unit can be moved from the front, based on the spaces available, as
displayed in the following figure.
Figure 3 - Movement of the UPS KEOR XPE – POWER UNIT
Installation and start-up of KEOR XPE UPS
Installazione e avviamento KEOR XPE UPS
OMAF9212 REV. A
27
Publicité
Chapitres
