Using The Talon; Talon Features - MINN KOTA TALON Mode D'emploi

TALON FEATURES

Become familiar with the features of the Talon to maximize the capabilities this product offers.
3 Stage
Anchor
©2017 Johnson Outdoors Marine Electronics, Inc.

USING ThE TALON

Work Light
Wave Absorption
Auto-Drive
Wave Absorption
With wave absorption, Talon enables your boat to move up or down
without affecting the deployed anchor. It uses a built-in floating
suspension to keep your boat anchored to the bottom, even in
rough water conditions.
3-Stage Anchor
Your Talon Anchor works in 3 stages so you can anchor in deeper
depths. The first stage of the anchor is designed with a spike for
precision anchoring.
Work Light
Talon is equipped with a work accessory light. When needed it is
an easy to use, hands free light that can be toggled in intensity
and color to provide adequate lighting based on your need. The
Work Light can be operated from the Indicator Panel and the
Remote.
Auto-Drive
In select Modes, Auto-Drive will automatically power the Spike into
the bottom with three successive hits, using increasing force on
each hit. Talon actually drives the anchor in for you to ensure the
anchor is seated. Talon's Auto-Drive stops driving the Spike when
the Spike contacts the bottom.
3 Seconds 3 Seconds
NOTICE:
Attempting
to retract the Talon
before it has completed
its automated
deployment sequence,
will only cancel the
deployment sequence
in process, and not
retract the Talon.
You may retract the
Talon normally when a
deployment sequence
has been completed or
canceled.
minnkotamotors.com | 25