MINN KOTA TALON Mode D'emploi page 30

CONTROLLING THE TALON WITH THE INDICATOR PANEL
Retracting the Talon from the Indicator Panel
Use the buttons on the Indicator Panel to retract the Talon anchor.
1
a. To retract the Talon, press the Up
Indicator Panel.
b. While the anchor is retracting, the action can be
paused on the panel by either pressing the Up
button again, or pressing the Down
c. The paused retraction can be resumed by pressing
the Up button again.
d. Once the retracting anchor on the Talon gets to
its fully retracted state, it will stop. If the Talon
is already fully retracted and the Up
pressed again, an error tone will sound.
NOTICE:
To retract a specific Talon, when two
Talons are paired, the anchor of the Talon where
the Indicator Panel is pressed will retract.
CAUTION
Be sure that the Talon is clear of obstructions and persons
while retracting. The spaces between the 3 stages of the
Talons can create a pinch point. Do not come in contact
with the Talon while it is retracting to avoid the pinch point.
30 | minnkotamotors.com
button on the
Indicator Panel
Up Button
button.
Down Button
button is
NOTICE:
to keep the anchor retracting. The Talon will automatically
continue to retract when the button is pressed until the
Talon is either fully retracted or receives input to stop.
NOTICE:
visual reference relaying the current depth of the Talon
anchor. Read the "Using the Talon" section of this manual
to learn how the LED display works.
You do not need to press and hold the button
The blue LED's on the Indicator Panel are a
©2017 Johnson Outdoors Marine Electronics, Inc.