Service & Maintenance; Replacing The Remote Battery - MINN KOTA TALON Mode D'emploi

SERVICE & MAINTENANCE
Before beginning any maintenance work, disconnect the Talon from the battery or if connected to a battery selector switch or power
disconnect switch, make sure that it is turned to the "off" position. Failure to disconnect power during maintenance work may result in
shock, unexpected operation and/or injury. Minn Kota recommends having the Talon serviced by an qualified marine technician at an
Authorized Service Center.

REPLACING THE REMOTE BATTERY

TOOLS AND RESOURCES REQUIRED
• Large Coin
INSTALLATION
1
a. Make sure your hands are clean, dry and static free.
Temporarily ground yourself by touching a grounded
metal object in order to discharge any static
electricity in your body.
CAUTION
Static electricity can cause damage to the circuit board.
Discharge any static electricity by touching a metal object
that is grounded before beginning the remote battery
replacement.
b. With the back of the Remote facing you, use a large
coin to rotate the Battery Cover counterclockwise
until either of the Unlock Icons align with the Arrow.
38 | minnkotamotors.com
CAUTION
1b
Unlock
Icon
Arrow
Remote
Back
Arrow
Unlock
Icon
Battery
Cover
©2017 Johnson Outdoors Marine Electronics, Inc.