Controlling The Talon With The Remote - MINN KOTA TALON Mode D'emploi

CONTROLLING THE TALON WITH THE REMOTE

Anchor Mode Button
Used to select between Standard Mode, Soft
Bottom Mode and Rough Water Mode.
Auto Up/Down Buttons &
Pairing Buttons
Used to deploy, retract or pause the anchor on the
Talon. Also used to pair the Remote to a Talon.
Talon Selection Button /
Work Light Button
Used to select the Port, Starboard, or both Talons.
Used to toggle the Work Light "on" and "off" and
switch between the different Work Light colors and
intensities.
Never leave the boat unattended with the Talon as your only boat anchor. Talon is not intended to provide primary anchorage. This
includes operating the remote at a safe distance. It is not recommended to leave the boat while operating the Talon with the remote.
Doing so is at the owner's risk. This product does not relieve you from the responsibility of safe operation of your boat.
©2017 Johnson Outdoors Marine Electronics, Inc.
Lanyard
Attachment
Anchor
Mode Button
Lanyard
Attachment
CAUTION
CONTROLLING THE TALON WITH THE REMOTE
Talon Selection LEDs
Auto Up/Down
Buttons & Pairing
Talon Selection LEDs
When 2 Talons are paired in the system, the right
LED is lit when the Starboard Talon is selected and
the left LED is lit when the Port Talon is selected.
Both the right and left arrows are lit when both
Talons are selected. When only one Talon is paired,
the lights will toggle, but the selection will control
the only paired Talon. When a selection is made, the
LEDs will stay lit for 1 second and then turn off.
Mode Selection LEDs
The Center LED flashes red and green and then turns
off for Standard Mode. The center LED will be lit
green for Soft Bottom Mode and lit red for Rough
Water Mode. When in Soft Bottom Mode and Rough
Water Mode, the LED will stay lit for 1 second and
then turn off.
Mode LED
Talon Selection Button /
Work Light Button
Button
minnkotamotors.com | 33