Using And Adjusting The Motor; Stowing & Deploying The Motor - MINN KOTA Traxxis Manuel De L'utilisateur

USING & ADJUSTING THE MOTOR
STOWING AND DEPLOYING THE MOTOR
WARNING:
When raising or lowering the motor, keep fi ngers clear of all hinge and pivot points and all moving parts.
HORIZONTAL
Stowing
1. Grab the back of the motor head or the motor shaft and lift up. If motor needs to be
pulled into boat more, loosen the steering tension knob to adjust shaft.
2. While lifting up, tilt the motor into the boat (the motor must be lifted approximately 1/2"
to disengage locking pins).
3. The bracket will ratchet into a locked position.
4. Retighten the steering tension knob and slide the quick release depth collar down to the
top of the steering tension knob for transport.
Deploying
1. Loosen the quick release collar.
2. Reposition and retighten to desired depth location.
3. Hold the motor shaft or head fi rmly, and loosen the steering tension knob.
4. Press the tilt lock button while holding control head and gently lower the motor into
the water.
5. Retighten the quick release collar.
6. Retighten the steering tension knob to the desired steering tension.
VERTICAL STOW:
Stowing
1. Firmly grasp the motor shaft.
2. Loosen the steering tension knob and lift up on the motor.
3. Retighten the steering tension knob to retain the vertical stow position of the motor.
4. Slide the quick release depth collar down to the top of the steering tension knob for
added security.
Deploying
1. Loosen the quick release collar.
2. Hold the motor shaft fi rmly, and loosen the steering tension knob.
3. Gently lower the motor into the water.
4. Retighten the quick release collar.
5. Retighten the steering tension knob to the desired steering tension.
10 | minnkotamotors.com
OVER
UP
DOWN
UP OVER DOWN
©2014 Johnson Outdoors Marine Electronics, Inc.