MINN KOTA TALON Mode D'emploi page 36

CONTROLLING THE TALON WITH THE REMOTE
Retracting the Talon from the Remote
Use the buttons on the Remote to retract the Talon anchor.
1
a. To retract the Talon, press the Up
Remote.
b. While the anchor is retracting, the action can be
paused on the remote by pressing either the Up
button or the Down
c. The paused retraction can be resumed by pressing
the Up button again.
d. Once the retracting anchor on the Talon gets to its
full retraction it will stop. If the Talon is already fully
retracted and the Up
error tone will sound.
NOTICE:
When two Talons are paired, the anchor
of the Talon selected on the Remote will retract.
The selection can be Port, Starboard, or both.
CAUTION
Be sure that the Talon is clear of obstructions and persons
while retracting. The spaces between the 3 stages of the
Talons can create a pinch point. Do not come in contact
with the Talon while it is retracting to avoid the pinch point.
36 | minnkotamotors.com
button on the
button.
button is pressed again, an
Talon Remote
NOTICE:
You do not need to press and hold the button
to keep the anchor retracting. The Talon will automatically
continue to retract when the button is pressed until the
Talon is either fully retracted or receives input to stop.
NOTICE:
The blue LEDs on the Indicator Panel are a
visual reference relaying the current depth of the Talon
anchor. Read the "Using the Talon" section of this manual
to learn how the LED display works.
Talon Selection LEDs
Talon Selection
Button
Auto Up/Down
Buttons & Pairing
Button
©2017 Johnson Outdoors Marine Electronics, Inc.