Using & Adjusting The Motor; Stowing & Deploying The Motor - MINN KOTA RIPTIDE SE Manuel De L'utilisateur

USING & ADJUSTING THE MOTOR
STOWING AND DEPLOYING THE MOTOR
WARNING:
When raising or lowering the motor, keep fi ngers clear of all hinge and pivot points and all moving parts.
MOUNT FEATURES
• The motor mount is designed to fold back and lock the motor fl at on the deck when not in use and to
provide secure stowage for transport.
• The pull grip and rope releases the lock bar, which automatically engages when the unit is lowered or
raised into position. The pull grip and rope should be used to both lower and raise the unit.
• The motor rest positions the lower unit as it comes in contact with the nose of the mount and guides
it onto the motor rest.
• The tube lock captures the motor shaft and keeps the lower unit centered on the motor rest.
• The hold-down strap must be used to place pressure on the motor shaft to hold the lower unit
tightly against the motor rest when stowed.
• The pull grip and rope can be stored by placing the pull grip on top of the tube lock or into the
rope stow slot on the control box of the motor.
TO DEPLOY THE MOTOR
Simply pull back and lift the motor off of the mount with the pull grip and rope. Lower the motor into the water using the pull grip
and rope. The motor will lock into the deployed position automatically.
TO STOW THE MOTOR
Pull back and lift the motor out of the water with the pull grip and rope. Lower the lower unit onto the motor rest using the pull
grip and rope. The motor will lock into the stowed position automatically. Wrap the hold-down strap over top of the motor shaft
to secure the motor.
Motor Shaft
Lower Unit
Motor Rest
Hold Down Strap
12 | minnkotamotors.com
Tube Lock
Pull Grip and Rope
©2014 Johnson Outdoors Marine Electronics, Inc.