Deleting Files; Scheduled Archiving; Start Time - Lorex L23WD Série Mode D'emploi

select ERASE&BURN, the system will first
erase any existing data on the USB device
and then burn the archive data.
7. Click START.
• The system begins to extract data and then
write data to the USB drive . This may take
several moments depending on the size of
the recorded data.
Once copying is finished, the Burning
NOTE:
window closes.
8. Click CLOSE to exit.

DELETING FILES

Delete video and image files in the archive
lists.
ATTENTION: The system immediately
deletes the files. Use caution when
deleting files from the Archive Lists.
To delete a file:
1. Click the RESERVED DATA MANAGEMENT
tab.
2. Select a file under AVI ARCHIVING LIST.
The file is highlighted with a white box.
3. Click DELETE to delete the file from the
USB device.
Figure 8.10 Deleting Files - files are immediately deleted when
you click DELETE.
4. Click CLOSE to exit.

SCHEDULED ARCHIVING

Scheduled Archiving allows you to back up
your videos to a USB device or FTP server on a
daily or individual basis.
To activate Scheduled Archiving:
1. Click the SCHEDULED ARCHIVING tab on
the left.
• The Scheduled Archiving tab opens.
Figure 8.11 Scheduled Archiving window.
2. Configure the following by clicking
adjust the values:
• OPERATION: Select ON.
• DEVICE: Select USB (for USB devices) or
FTP.
• MODE: Select ONCE or DAILY.
• START TIME: Enter a time you want the
system to begin archiving.
• FROM : Enter the time you want the system
to start archiving data.
• TO: Enter the time you want the system to
stop archiving data.
3. Under the channel list, select the AUDIO
and CAMERA channels you wish to include
in the archiving process.
4. Click APPLY to save your settings.
Archiving
to
47