Easy Connect - Lorex L23WD Série Mode D'emploi

EASY CONNECT

Easy Connect allows you to connect to
remotely connect to your system without port
forwarding. You must create an Easy Connect
account to enable remote viewing.
For details on creating an Easy Connect
account, see "Remote Viewing Using Lorex
Easy Connect" on page 120.
To configure Easy Connect:
1. Click the EASY CONNECT tab on the left.
• The Easy Connect window opens.
Figure 14.9 Easy Connect tab.
2. Under YOICS, click
to enable or disable Easy Connect.
• Click RESET if you have a problem
connecting to the Easy Connect service.
• After you have set up an Easy Connect
account, click the STATUS button to verify
that the connection works.
• Click the LOG button to view a list of system
logs that occurred during connectivity.
3. Click APPLY to save your settings.
to select ON/OFF
Using the System Menu
69