Adjusting Video Monitoring Settings - Lorex L23WD Série Mode D'emploi

Adjusting Video Monitoring Settings

To adjust Monitor Settings:
1. Click the Monitor sub-menu (Display>Monitor). The Monitor Setting window opens.
Figure 22.1 Monitor Setting window.
2. Under the Sequence Dwell drop-down menu, select the duration you want a sequence to
remain on screen.
• Sequence Dwell choices are: 1 second, 2 seconds, 3 seconds, 5 seconds, 10 seconds, 15
seconds, 20 seconds, 30 seconds, 40 seconds, 60 seconds.
3. Under the Spot Dwell drop-down menu, select the duration you want the spot dwell to last.
• Spot Dwell choices are: 1 second, 2 seconds, 3 seconds, 5 seconds, 10 seconds, 15 seconds,
20 seconds, 30 seconds, 40 seconds, 60 seconds.
4. Under the De-interlace Mode drop-down menu, select ON or OFF to turn on or off
de-interlacing mode.
• It is recommended to turn de-interlacing mode on for improved image quality.
5. Under the Alarm Pop-up Mode drop-down menu, select ON or OFF to turn on or off Alarm
Pop-up.
• When an alarm recording is triggered, the Alarm Pop-up mode will automatically bring the
channel with the alarm recording into full screen.
6. Under the Alarm Pop-up Dwell drop-down menu, select the duration of the Alarm Pop-up.
• Alarm Pop-up Dwell durations are: 1 second, 2 seconds, 3 seconds, 5 seconds, 10 seconds,
15 seconds, 20 seconds, 30 seconds, 40 seconds, 60 seconds.
7. Under the Motion Pop-up Mode drop-down menu, select ON or OFF to enable or disable
Motion Pop-up Mode.
• When a Motion Recording is triggered, the Motion Pop-up mode will automatically bring the
channel with the motion recording into full screen.
Using Web Remote Viewer
101