Lorex L23WD Série Mode D'emploi page 140

Remote Viewing Using Lorex Easy Connect
2. After you log into Yoics, a message box indicates that a device has been detected by Yoics.
Click
Complete Registration
Figure 26.2 Easy Connect device detection.
3. Under Yoics Device Name, enter in the desired name for your DVR. In this example, we named
the system name to "DVR". Click
Figure 26.3 Selecting the system from the Easy Connect menu.
: You do not have to click the Upgrade Now button. This service is provided free of charge.
NOTE
122
to continue. A "Register New Devices" window opens.
to continue.
Register Now
If you do not see this
NOTE:
pop-up window, double
check that Easy Connect is
enabled on your DVR.
The DVR must be
NOTE:
connected directly to a
router through a hardwire
connection.
Enter desired name of
your DVR here.