User; User Management - Lorex L23WD Série Mode D'emploi

Using the System Menu

USER

Configure user authorities and
logout options.

USER MANAGEMENT

Use the User Management menu to create new
user IDs, edit passwords, and set email
notifications.
By default, the system is configured
NOTE:
with a user ID of ADMIN, belonging to the
group ADMIN and with a password of 1234.
To add a new user ID:
1. Click the SETUP button (
Status Bar.
2. Click SYSTEM SETUP.
3. Click USER.
• The User window opens.
Figure 14.0 User Management window.
4. Click the ADD button near the bottom of
the window.
• The Add window opens.
Figure 14.1 Add user window.
5. Double-click the field beside USER ID to
open the Virtual Keyboard and enter a
name/title for the new user.
64
6. Double-click the PASSWORD field to open
the Virtual Keyboard and enter a password
for the new user.
NOTE:
characters long.
7. Under GROUP, select ADMIN, MANAGER,
or USER.
8. Double-click the E-MAIL field to open the
Virtual Keyboard. Enter the user's email
address so they can receive email
notifications of events on the system (max.
64 characters).
9. Under E-MAIL NOTI. select ON/OFF to
enable or disable -mail notifications for
the new user.
) in the
10. Click OK to save your settings.
11. Click APPLY to save your settings or click
CANCEL to restore defaults.
To edit an existing user:
1. Under USER ID, double-click a user name.
The Edit window opens.
Figure 14.2 Edit user window.
2. Double-click the PASSWORD field to edit
the password for the current user.
NOTE:
characters long. Password is case sensitive.
3. Double-click E-MAIL to open the Virtual
Keyboard and edit the email address of the
current user (max. 64 characters).
4. Beside E-MAIL NOTI. click
ON/OFF to enable or disable email
notifications for the current user.
5. Click APPLY to save your settings or click
CANCEL to restore defaults.
Password must be at least 4
Password must be at least 4
and select