Configuring Alarm Input Settings - Lorex L23WD Série Mode D'emploi

Configuring Alarm Input Settings

To configure your alarm input settings:
1. Click the Alarm Input sub-menu on the navigation bar on the left (Sensor>Alarm Input). The
Alarm Input Setting window opens.
Figure 24.0 Alarm Input Setting window.
2. Under the Operation drop-down menu, select ON or OFF to enable or disable alarm input on
the particular channel.
NOTE: To apply changes across all channels, use the ALL drop-down menu.
Use the ALL tab to
apply changes
across all channels.
Figure 25.1 Alarm Input Setting window.
3. Under the Type drop-down menu, select if the alarm is normally open (N/O) or normally
closed (N/C).
4. Under the Text field, enter in the message you want to receive if an alarm is triggered.
5. Click OK to save your settings.
Using Web Remote Viewer
115