Computer Monitor (Mode 2) - Lorex L23WD Série Mode D'emploi

COMPUTER MONITOR (MODE 2)

Computer Monitor mode is used to display a device (i.e. a computer) connected to the DVI port on
the system. This is ideal for using your screen as your computer monitor while monitoring your
cameras. For example, a receptionist can work on the computer while watching the cameras.
To connect and view a DVI device on your system:
1. Connect a DVI device into the DVI port on the rear panel of the system.
Figure 3.3 DVI port on rear panel.
2. Press the MODE button on the front panel.
• The Mode menu opens.
Figure 3.4 Opening the Mode menu.
3. Use the navigation cursor on the front panel to select PC and then press the Enter button.
• The system switches into PC mode.
Figure 3.5 Opening DVI mode.
MODE button
Enter button
Navigation cursor
Multi-Function Display
DVI port
• Your system must have
a DVI output for the
Computer Monitor
mode to function.
• The system detects DVI
signals only.
• You CANNOT connect a
VGA device to the DVI
port by using a DVI to VGA
converter.
Select PC
17