Lorex L23WD Série Mode D'emploi page 125

Configuring the Activation Tab
Continuous Recording Motion Recording Continuous/Motion Recording
None (no recording)
Figure 23.0 Activation tab.
To configure the Activation tab:
• Select the recording type (Cont (continuous recording); Mot (motion recording); Cont/Mot
(continuous and motion recording) )
• Drag your cursor across the channel bar to select the duration of recording.
• Optional: Select a second and third recording type (Cont, Mot, Cont/Mot) and drag your cursor
across the channel bar.
• Use the Select All, Reverse All, Delete All buttons near the bottom of the window to
manipulate what you select.
• Click OK to save your settings.
NOTE: You can mix recording types in a channel. See Figure 37.0.
3. Under the Resolution drop-down menu, select the desired resolution for each channel.
• Resolution choices are: 352 x 240, 704 x 240, 704 x 480.
4. Under the Frame Rate drop-down menu, select the desired frame rate for each channel.
• Frame Rate choices (in FPS) are: 1, 2, 3, 7, 15, 30.
• The far-right column, under FPS, shows you how many FPS you have remaining.
5. Under the Quality drop-down menu, select the desired recording quality of each channel.
• Recording quality choices are: Super, Highest, High, Medium, Low.
6. Under the Audio drop-down menu, select ON or OFF to enable or disable audio in the
specified channel.
7. Click OK to save your settings.
In this example, the user configured channel 1 (CH1) with different
recording types.
Between 12:00AM and 6:00AM, motion recording (Mot) is enabled.
Between 6:00AM and 12:00PM, no recording type (None) is selected.
Between 12:00PM and 6:00PM, continuous and motion recording (Cont/
MOT) is selected.
Using Web Remote Viewer
107