Video Playback; Backup Function - Lorex L200 Serie Manuel D'instructions

VIDEO PLAYBACK

VIDEO PLAYBACK
The system can play previously recorded video
onscreen, while still recording live video
images.
BUTTON DESCRIPTION
PLAY / Playback of previously recorded
PAUSE data / Pauses the data playback
REC Start manually recording / Stop
recording
FF Fast Forward the video playback.
Press the FF button to change
playback speed to 2x, 4x or 8x
speed.
REW Reverses the video playback.
Press the REW button to change
playback speed to 2x, 4x or 8x
speed.
STOP Stops the playback, and returns to
live monitoring mode.
NOTE: A detailed button description can be
found in the Front Panel section of this
manual.
The video playback can be displayed in Single
(Full Screen) or QUAD. To change the
onscreen display, press the CH1~CH4 buttons
or the CH1~CH8 buttons (L208/L218) to
change the view.
The Date and Time of the video image are
displayed on the lower part of the screen. The
Video Playback speed is also displayed.
*CD/DVD-RW optional on certain models. Hardware
configuration varies by model.
38

BACKUP FUNCTION

There are two methods to backup video data:
•
To a USB flash drive
•
To a blank CD*
NOTE: This system does not support video
backup when live recording is occurring.
Recording must be stopped before data backup
can be performed.
USB BACKUP
To save video to the USB flash drive, the start
and end times for the selection must be set:
•
Press the •• buttons to set the backup
starting and ending points
•
The available disk space and copy size
are shown in KB
•
Press the SEARCH button to start the
backup.
NOTE: It is recommended that the size of the
USB flash drive is compared against the Copy
Size before starting Backup. If the drive space
is too small, the message "CAPACITY IS NOT
ENOUGH" will appear.