Selecting The Model Type - ModelCraft 20 65 01 Notice D'utilisation

To use the control elements to adopt data saved in the transmitter, import the data with the
[GetUser] button.
After starting the program and selecting the COM port, you can program all the main menu
items available one after the other, without leaving the programming mode intermittently.
c) Selecting the Model Type
The transmitter is preset to Model Type [0] (winged model).
If you want to fly a helicopter the first time you put the system into operation, first you have to
change the Model Type.
Model Types
There are four Model Type available: The Acro Model Type (0) is the designation of the presetting for the mixer
function for winged models. Three additional presettings are available for helicopter models, depending on the arran-
gement of the swash plate servos, under 120°, 140° or as single servos (90°). When a helicopter has been selected
via the software, you can switch between these three presettings also directly on the transmitter.
The most important flight settings for the four model types can be programmed either using the
control elements for the transmitter or via the software.
Selecting the Model Type
On the starting screen, press the [TYPE] button.
•
Scroll to the Model Type desired.
•
Confirm the selection with [OK].
•
After selecting the Model Type, you have a choice between the default
setting and data records you have already saved on the PC.
The first time it is put into operation, confirm the preset [Default] with
•
[OK].
If you have already saved model-specific settings, click on [User Defi-
•
ne], and enter the file name directly.
Or:
Click on the arrow next to the input field, and browse for the desired
•
file in your PC.
Confirm the selection with [OK].
•
74