Setting The Position On The Holder For The Robot; Safety; General; Position A - Fronius Laser hybride Instructions De Service

Setting the position on the holder for the robot

Safety

Work that is carried out incorrectly can cause serious injury and damage.
Set up work must only be performed by trained and qualified personnel. Observe the safety
regulations in the operating instructions, paying particular attention to the section entitled
"Safety inspection".

General

The LaserHybrid head can be mounted on the holder for the robot in positions A to D, as
shown below.

Position A

Mounting the LaserHybrid head in position A (rotated by 180°)
(1)
78
WARNING!
Holder
(1)
180°