Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Safety inspection
The operator is obliged to have the LaserHybrid head checked by a qualified electrician to
ensure it is safe for use after any modifications, alterations, repairs, care and maintenance,
and in any case at least every twelve months.
Regulation
IEC (EN) 60 974-1
BGV A2, §5
BGV D1, §33 / §49
VDE 0701-1
VDE 0702-1
Alterations
Do not carry out any modifications, alterations, etc. to the LaserHybrid head without the
manufacturer's consent.
Components that are not in perfect condition must be replaced immediately.
Replacement and
Use only original spare and wearing parts (also applies to standard parts).
wearing parts
It is impossible to guarantee that parts sourced from third parties are designed and manu-
factured to meet the demands made of them, or that they satisfy safety requirements.
When ordering, please give the exact designation and part number as shown in the spare
parts list, as well as the serial number of your device.
Calibration of
In view of international standards, regular calibration of power sources is necessary. Fro-
power sources
nius recommends a 12-month calibration interval. For more information, please contact
your service centre.
CE marking
The LaserHybrid head fulfils the fundamental requirements of the Low Voltage Directive
and the Electromagnetic Compatibility Directive and is thus CE-marked.
Copyright
Copyright of these operating instructions remains with the manufacturer.
The text and illustrations are all technically correct at the time of printing. We reserve the
right to make changes. The contents of the operating instructions shall not provide the ba-
sis for any claims whatsoever on the part of the purchaser. If you have any suggestions for
improvement, or can point out any mistakes that you have found in the instructions, we will
be most grateful for your comments.
68
Title
Arc welding equipment - Part 1: Power sources
Electrical plant and equipment
Welding, cutting and associated processes
Repair, modification and inspection of electrical appliances;
general requirements
Repeat tests on electrical equipment
Publicité
Chapitres
Table des Matières
