Position B; Positions C And D - Fronius Laser hybride Instructions De Service

NOTE!
In positions A and B, the LaserHybrid head can be mounted after being rotated 180°.
This setting makes it easier to weld short weld seams at the edges or corners of the work-
piece.

Position B

Mounting the LaserHybrid head in position B (rotated by 180°)
(1)
NOTE!
In positions A and B, the LaserHybrid head can be mounted after being rotated 180°.
This setting makes it easier to weld short weld seams at the edges or corners of the work-
piece.

Positions C and D

Holder
Position C
(1)
180°
Position D
79