Removing And Inserting The Internal Hosepack Liner; Removing The External Hosepack Liner - Fronius Laser hybride Instructions De Service

Removing and in- IMPORTANT! If an external liner is being used instead of an internal one, refer to the sec-
serting the inter- tion entitled "Removing and inserting the external hosepack liner".
nal hosepack
liner Removing the internal hosepack liner
1
2
3
Inserting the internal hosepack liner
NOTE!
The inner liner (I) must not touch the feed roller (2) or the pressure roller (3).
1
2
3
Removing the ex-
ternal hosepack
liner
Feed out the wire
Undo hexagon nut (H) using the flat spanner, 10 mm (6)
Pull out the inner liner (I)
Feed the inner liner (I) as close as possible to the feed roller (2) and pressure roller (3)
Tighten the hexagon nut (H) using the flat spanner (6)
Threading the wire
(O)
(M)
(N)
(L)
IMPORTANT! If an internal liner is being
used instead of an external one, refer to the
section entitled "Removing the internal ho-
sepack liner".
Press and hold button (L)
1
Pull the hose (M) out of the retainer (N)
2
Release button (L)
3
Pull the hose (M) out through the hol-
4
der (O)
Take the liner out of the wirefeeding
5
hose
97