Publicité
E N
WAVEFORMS (CONTINUED)
VMS™
Advice on size and type of electrodes to
be used is given in device GUI
"treatment guidelines" feature
VMS is a symmetrical biphasic waveform with a
100 µsec interphase interval. Because the pulse
is relatively short, the waveform has a low skin
load, making it suitable for applications requiring
high intensities, such as in muscle re-education
protocols.
Output Mode
Electrodes
Available on Channels
1, 2
Treatment Time (Stim)
1-60 min
Treatment time (Combo)
1-30 min
Mode Selection
CC or CV
Output Intensity
0- 140 mA (CC) 0-140 V
(CV)
Anti-Fatigue
Off or On
Channel Mode
Single, Reciprocal, Co-
Contract
Cycle Time
Continuous or User Defined
Frequency
1-200 pps
Phase Duration
30-1,000 µsec
Ramp
0-5 sec
Set Intensity
Individual/both Channel
Intensity Setting in Reciprocal and Co-Contract modes
IRMS
0-50mA
DC component
No
SYSTEM
Diadynamic Waveforms
Advice on size and type of electrodes to be used is
given in device GUI "treatment guidelines" feature
The Diadynamic waveforms are rectified alternating
currents. The alternating current is modified
(rectified) to allow the current to flow in one
direction only.
Output Mode
Electrodes
Available on channels
1, 2
Treatment Time
1-60 min
Mode Selection
CC
Output Intensity
0- 60 mA
MF (Monophasé Fixe) - Frequency of 50 Hz:
phase duration of 10 ms followed by a pause of 10 ms.
IRMS [mA]
0-33 mA
DF -
Frequency of 100 Hz: phase duration of 10 ms
CP -
1 second of MF followed abruptly by 1 second of DF.
LP -
Rhythmical fluctuation between 2 MF currents.
CP-iso -
A combination of MF and DF waveforms. CP-id: Same as
CP-iso.
IRMS
0-47mA
DC component
Yes
INTELECT
MOBILE 2 USER MANUAL
®
29
Publicité
