Copyright Protection; Declaration Of Conformity; Safety; General Information - Bartscher 116.402 Mode D'emploi

device has been modified in line with new technology. If you have any questions, you should
contact the manufacturer.
NOTE!
Read the instruction manual carefully before using the device. The manufacturer does
not accept liability for any damage or malfunction resulting from not following the
instructions for use.
The instruction manual should be kept near the device, easily accessible for anyone wishing
to work with or using it. We reserve the right to make technical changes for the purpose of
developing and improving its useful properties.

1.4 Copyright protection

The instruction manual including any texts, drawings, images or other illustrations is
copyrighted. No part of this publication may be reproduced, transmitted or used in any form
or by any means without permission in writing from the manufacturer. Any person committing
an unauthorized act in relation to this publication shall be liable to claims for damages. All
rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are copyrighted and
subject to other protection rights. Any person unlawfully using this publication is
liable to criminal prosecution.

1.5 Declaration of conformity

The device complies with the current standards and directives of the EU, as certified in the
EC declaration of conformity.
If required, we will be glad to send you the according declaration of conformity.

2. Safety

This section provides an overview of all important safety aspects.
In addition, every chapter provides precise safety advice for the prevention of dangers which
are highlighted by the use of the above-mentioned symbols.
Furthermore, attention should be paid to all pictograms, markers and labels on the device,
which must be kept in a permanent state of legibility.
By following all important safety advice, you will gain an optimal protection against all hazards
as well as the assurance of a safe and trouble-free operation.

2.1 General Information

This device is designed in accordance with the presently applicable technological standards.
However, the device can pose a danger if handled improperly and inappropriately.
Knowing the contents of the instruction manual as well as avoiding mistakes, and thus
operating this device safely and in a fault-free manner, is very essential to protect yourselves
from any hazards.
To prevent hazards and to ensure optimum efficiency, no modifications or alterations to the
device that are not explicitly approved by the manufacturer may be undertaken.
- 32 -