Panasonic AW-RP50E Mode D'emploi page 29

Connections
3
Turn the F2 dial, select "Yes", and then
press the F2 dial.
This starts the "Auto IP setting" process.
When "Auto IP setting" has been initiated, the
progress is shown by the number of displayed
dots which are reduced one by one.
AUTO SETUP
When all the operations have been completed
successfully, "COMPLETE!" is displayed.
AUTO SETUP
The remote cameras and the switcher are
automatically rebooted, and they restart with the
new IP addresses which were set.
The remote cameras can now be operated from
the unit.
The function for linking the switcher with the unit
becomes available for use at this point.
 Memo 
If the IP addresses were not set successfully,
"SET UP ERR!" is displayed.
AUTO SETUP
SET UP ERR!
The cause of the problem is likely a network
malfunction.
Check the connection status of the hub and LAN
cables, and then retry the "Auto IP setting" operation.
All manuals and user guides at all-guides.com
COMPLETE!
28 (E)