Panasonic AW-RP50E Mode D'emploi page 37

Selecting the remote cameras to be operated
Up to 100 cameras can be divided into 1 to 20 groups
by menu operations, and controlled by the unit.
The selection procedure is described below.
1
Set the MENU button to ON.
Press the MENU button and light its indicator.
2
Set the PRESET MEMORY/MENU 8 button
(CAMERA) to ON.
When the button is pressed and its indicator is
lit, the [CAMERA] menu is displayed on the LCD
panel.
3
Press the F1 dial.
The GROUP SELECT item is displayed.
[1]GROUP
1.GROUP SELECT
4
Turn the F2 dial, select the group, and
then press the F2 dial.
The remote cameras assigned to the group selected
here can be selected using the CAMERA STATUS/
SELECTION buttons.
All manuals and user guides at all-guides.com
▼
Press the F1 dial.
1
36 (E)