Panasonic AW-RP50E Mode D'emploi page 18

Basic operations for the menus
1
Set the MENU button to ON.
Press the MENU button and light its indicator.
2
Select the target menu.
Press the corresponding PRESET MEMORY/
MENU button, and light its indicator.
For details on the menus assigned to these
buttons, refer to "Table of menu items"
(<Operations and Settings> Operating
Instructions).
The selected menu is displayed on the LCD panel.
3
Change the settings using the F1 dial and
F2 dial.
Use the F1 dial and F2 dial to select the menus
and change the settings.
Use the F1 dial for operations involving the items
displayed on the top line of the LCD panel.
Use the F2 dial for operations involving the items
displayed on the bottom line of the LCD panel.
1
For detailed operations, refer to the Operating Instructions — <Operations and Settings>.
All manuals and user guides at all-guides.com
POWER ALARM
1 2
MENU PAGE GAIN/PED R/B GAIN R/B PED
6 7
STORE DELETE DETAIL SCENE/MODE CAMERA
PRESET MEMORY / MENU
1 2
IRIS AUTO
CAMERA STATUS / SELECTION
AUTO
TELE
ZOOM
WIDE FOCUS/
PUSH
17 (E)
  Press the EXIT button to return the menu to its
previous hierarchical level.
  When the down arrow "" is displayed for a
setting item, it means that the value shown will be
entered and the setting reflected when the F1 dial
or F2 dial is pressed.
1.GROUP SELECT
  When the down arrow "" is not displayed for a
setting item, it means that the value shown will be
entered and the setting reflected when the F1 dial
or F2 dial is turned.
R GAIN :
B GAIN :
F1
F2
F1 CAMERA
OSD
3 4 5
AWB/ABB SHUTTER F2 EXIT
8 9 10
SETUP SYSTEM USER1 USER2
3 4 5
PT ACTIVE
LOW HI
OTAF PTZ/FOCUS SPEED PAN/TILT
2
1
±0
F1 dial
±0
F2 dial
3