Publicité
2. Put a metal object in front of the proximity switch.
The related indicators on the proximity switch and
the remote control come on.
3. Remove the metal object. The related indicators on
the proximity switch and the remote control go off.
Limit switch
The limit switch prevents damage to the product and
the rigging system when the product is at the top of
the steel wire ropes. If the limit switch is engaged, the
2149 - 001 - 02.11.2023
up movement stops and it is only possible to move the
product down.
To do a check of the limit switch
1. Connect and start the dust collector. Refer to
connect a dust collector on page 15 .
2. Make sure that there are no steel wire ropes in the
winches.
3. Put a metal object in front of the proximity switch.
The related indicators on the proximity switch and
the remote control come on.
4. Push the lever for up and down movement forward.
The winches start.
To
11
Publicité
