Publicité
4. Push the lever up and turn the handwheel
counterclockwise.
A
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
CAUTION:
behind a vehicle.
•
Make sure that the power supply is disconnected
before transportation.
•
Make sure that the electrical cable and
dust extraction hose are disconnected before
transportation.
•
Attach the product on a pallet during transportation.
•
Remove the abrasive material before transportation.
•
Lift the product to move it or put the product on a
To lift the product on page 40 .
vehicle. Refer to
•
Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
CAUTION:
in plastic. It can cause damage to the
abrasive material seal.
2149 - 001 - 02.11.2023
B
Transportation, storage and disposal
Be careful during
Do not tow the product
Do not wind the product
CAUTION:
handwheel when the brake release lever
is in the up position. If you do, the
product starts to move down.
To reset the product after an operation
failure
1. Move the product down to the ground or onto a
pallet.
2. Set the ON/OFF switch to OFF.
3. Push the OFF button on the remote control.
4. Wait 15 seconds and then set the ON/OFF switch to
ON and start the remote control.
Do not release the
39
Publicité
