Publicité
3. Remove the abrasive material seal from the product.
4. Install the new abrasive material seal in opposite
sequence.
To remove and install the hopper and
the valves for the abrasive material
1. Remove the hopper.
2149 - 001 - 02.11.2023
2. Remove the clamp levers.
3. Disconnect the cables to the valves for the abrasive
material.
4. Remove the valves for the abrasive material.
5. Install in the opposite sequence.
To remove and install the control cages
1. Remove the hopper and the valves for the abrasive
To remove and install the hopper
material. Refer to
and the valves for the abrasive material on page 29 .
2. Remove the 4 nuts and the control cage ring.
29
Publicité
