Publicité
Approved abrasive material
Approved abrasive material
Dimension, mm
Hardness, HRC
* special operations
Approved steel wire ropes
Rope
10
Noise and vibration declaration
statement
These declared values were obtained by laboratory
type testing in accordance with the stated directive or
standards and are suitable for comparison with the
declared values of other products tested in accordance
with the same directive or standards. These declared
Extension cables
Cable length
Calculated at a pre-fuse GG
> 20m
20m > 50m
50m > 75m
3
Can also be mixed with SG25, SG18 and SG16. Maximum 25 % grit mixed in the abrasive material.
4
The cross sections must be re-calculated when other type or dimension pre-fuse are used than is given.
42
High carbon steel shot
S-330*
S-390
1.0
1.2
Nominal rope diame-
ter
10.2
10.2
10.2
4
:
3
S-460
S-550
1.4
1.7
45–52
Manufacturer
Pfeifer-Drako
DWH-Taurus
Vornbäumen
values are not suitable for use in risk assessments
and values measured in individual work places may
be higher. The actual exposure values and risk of
harm experienced by an individual user are unique and
depend upon the way the user works, in what material
the product is used, as well as upon the exposure time
and the physical condition of the user, and the condition
of the product.
≤ 16 A
16 amp
2
1.5 mm
2
2.5 mm
2
4 mm
High carbon steel grit
S-660*
SG25
2.0
1.0
Rope type
5 x K26WS SFC
2160 B sZ
5 x K26WS SFC
2160 B sZ
5 x K26WS SFC
2160 B
Cross section
≤ 32 A
≤ 63 A
32 amp
63 amp
2
2.5 mm
10 mm
2
4 mm
10 mm
2
6 mm
16 mm
2149 - 001 - 02.11.2023
SG16
1.4
Rope tag color
Blue
Green
Green
≤ 125 A
125 amp
2
2
25 mm
2
2
25 mm
2
2
35 mm
Publicité
