Publicité
a) Unlock the lid on the hopper and open it.
Dust collector connection, overview
5
1. Two dust extraction hoses, 5 m/16 ft., Ø150 mm/6 in.
2. Y-connector
3. Dust extraction hose, 2 m/7 ft., Ø150 mm/6 in.
4. 2-way valve for dust collector airflow
5. Dust extraction hose, 15 m/50 ft., Ø150 mm/6 in.
2149 - 001 - 02.11.2023
1
3
2
4
b) Fill the separator with abrasive material through
the hopper.
CAUTION:
with the same quantity of abrasive
material that has been used. Make
sure that the separator is not filled
above the maximum level.
1
To connect a dust collector
WARNING:
collector if a dust extraction hose is
damaged. The risk increases that you
breathe in dust that is dangerous to your
health. Use approved respiratory protection.
Fill the separator
Do not use the dust
15
Publicité
