Publicité
2. Push the brake release lever through the opening
in the motor housing and onto the bracket on the
brake.
3. Push the brake release lever up. The product starts
to move down slowly.
4. To stop the movement, release the lever.
To move the product up manually in an
emergency
The product can be manually moved up the steel wire
ropes in an emergency.
CAUTION:
the winches. Do the procedure on the winch
on the other side of the product at the same
time. Two persons are necessary. If the
product tilts, it can cause damages.
38
The procedure shows 1 of
1. Remove the protective cap from the motor housing.
Remove the brake release lever and the handwheel.
2. Put the handwheel through the hole and onto the
motor shaft. Push the lever through the opening
in the motor housing and onto the bracket on the
brake.
3. Hold the handwheel tightly.
2149 - 001 - 02.11.2023
Publicité
