Mercedes-Benz UNIMOG 405.050 2008 Mode D'emploi page 31

2 Technical threshold values for planning
2.1 Axle loads and gross vehicle weights
Vehicle kerb weights with driver and full tank
Vehicle/equipment
Basic, entirely without special equipment
Winter service equipment without platform, without tip
cylinders, without front PTO
Winter service equipment with platform,
without front PTO
Winter service equipment with platform, with front PTO
Max. permissible weight
Table 2.1: UNIMOG axle loads and gross vehicle weights
Note permissible wheel/tyre combinations, see Technical Manual for further information.
A tolerance of 5 % is possible according to DIN 70020.
4
Note minimum rear axle load (2000 kg) for operation on public roads
Directives de carrossage Mercedes-Benz pour UNIMOG U20
Front axle in [kg]
3200
3300
3300
3500
4800
Partie B
2 Technical threshold values for planning
2.1 Axle loads and gross vehicle weights
Rear axle in [kg] GVW in [kg]
4
1500 4700
4
1600 4900
2000 5300
2000 5500
7500 (standard and X17)
4800
8500 (X18)
État: 31.10.2008 31