Publicité
Les langues disponibles
Les langues disponibles
Safety and Regulatory Information
Moving Warnings
Be sure to include this manual when transporting the instrument.
Turn off the power switch before moving the instrument. Moving the product while the
power is turned on can cause electric shock or instrument damage.
Remove all wiring before moving the instrument. Moving the product with the cables
connected can cause wires to break or injuries due to the product falling over.
When transporting the product, be sure to use the original packing materials. Damage
may result from vibrations or from the product falling during transportation.
Installation Warnings
Have a qualified engineer connect the power cord to the switchboard.
Protective circuits inside the instrument, including input fuses, are connected to match
the input terminal polarity. Make sure the colors of the wires connected to the input
terminals (L, N, and GND) are correct.
Verify that all safety precautions are taken. Make all connections to the unit before
applying power. Note the instrument's external markings described under "Safety
Symbols."
You cannot use standard rack mounting support rails, as they would block the airflow
needed for cooling.
Heavy Weight
Danger to hands and feet. To avoid personal injury and damage to the instrument, always
use a sturdy cart or other suitable device to move the instrument. Do not lift the
instrument alone; always use two people to lift the instrument.
Keysight AC6800B Series Operating and Service Guide
9
Publicité
