Publicité
Les langues disponibles
Les langues disponibles
SYSTem Subsystem
Command/Query
SYSTem:BEEPer[:IMMediate]
SYSTem:BEEPer:KCLick ON|1|OFF|0
SYSTem:BEEPer:KCLick?
SYSTem:BEEPer:STATe ON|1|OFF|0
SYSTem:BEEPer:STATe?
SYSTem:COMMunicate:RLSTate
LOCal|REMote|RWLock
SYSTem :COMMunicate:RLSTate?
SYSTem:ERRor[:NEXT]?
SYSTem:ERRor:COUNt?
SYSTem:SECurity:IMMediate
SYSTem:SSAVer[:STATe] ON|1|OFF|0
SYSTem:SSAVer[:STATe]?
SYSTem:SSAVer:DELay <seconds>|MINim-
um|MAXimum
SYSTem:SSAVer:DELay? [MINimum|MAXimum]
SYSTem:SSAVer:RWAKeup ON|1|OFF|0
SYSTem:SSAVer:RWAKeup?
SYSTem:VERSion?
TRIGger Subsystem
Command/Query
TRIGger:ACQuire[:IMMediate]
TRIGger:ACQuire:SOURce IMMediate|BUS
TRIGger:ACQuire:SOURce?
TRIGger:SYNChronize:SOURce IMMediate|PHASe
TRIGger:SYNChronize:SOURce?
TRIGger:SYNChronize:PHASe[:ON] <value>|MINim-
um|MAXimum
TRIGger:SYNChronize:PHASe? [MINimum|MAXimum]
TRIGger:TRANsient[:IMMediate]
TRIGger:TRANsient:SOURce IMMediate|BUS
TRIGger:TRANsient:SOURce?
Keysight AC6800B Series Operating and Service Guide
Description
Issues a single beep.
Disables or enables the click tone heard when you press a front-panel key.
Disables or enables the beep heard when an error is generated.
Configures the remote/local/lockout state of the instrument.
Reads and clears one error from the error queue.
Returns the number of errors in the error queue.
Clears all user memory (including stored states) and reboots the instrument in
the
*RST
state.
Enables or disables the screen saver.
Sets the delay time for screen saver activation.
Enables or disables remote screen saver wake-up.
Returns the version of SCPI that the instrument uses.
Description
Sends a software trigger to the ACQuire subsystem.
Sets the trigger source that starts the measurement after
INIT:ACQ.
Sets the output-on phase control when OUTPut ON is sent.
Sets the phase angle of the output-on phase control in degrees.
Triggers the TRANsient subsystem.
Sets the trigger source for changing the setting value after
INIT:TRAN.
3 SCPI Programming Reference
117
Publicité
