Publicité
Les langues disponibles
Les langues disponibles
1 Getting Started
Resetting the LAN
You can perform an LXI reset of the LAN settings. This resets DHCP (ON), DNS server address
configuration, mDNS state (ON), and Web password (blank). These settings are optimized for
connecting your instrument to a site network. They should also work well for other network
configurations.
You can reset the all LAN settings to their factory defaults and restart networking. These default
settings are listed under
[Menu] > System > IO > LAN > Reset
or
[Menu] > System > IO > LAN > Defaults
Select Reset to activate the selected LAN settings and restart networking.
Modifying the LAN Settings
Press [Menu] > System > IO > LAN > Modify to modify the LAN settings.
IP Address
Press [Menu] > System > IO > LAN > Modify > IP to configure the instrument addressing.
If Manual is selected, additional parameters appear, as shown below.
Front Panel
[Menu] > System > IO > LAN > Modify > IP
Select Auto or Manual. See below for a full description.
The configurable parameters include:
44
Default
Settings.
Front Panel
SCPI Command
Not available
Keysight AC6800B Series Operating and Service Guide
SCPI Command
Not available
Publicité
