Keysight AC6800B Serie Guide D'utilisation Et D'entretien page 83

2 User Information
Reset the Instrument to Factory Default Values
Select [Menu] > States > Reset > Reset to reset the instrument to its factory defaults.
SCPI: *RST
Configure the Instrument's Power-on State
Select [Menu] > States > PowerOn to configure the instrument's power-on state.
Reset state (*RST) is the factory default.
Recall state 0 will recall the state saved in location 0.
Auto resume causes the unit to power up in its power-down state. State changes occurring in the last
three to four seconds before power-down may not be restored. For this option, the output is always off
regardless of whether it was on at power-down.
Keysight AC6800B Series Operating and Service Guide 83