Publicité
Les langues disponibles
Les langues disponibles
Item
Settings Keys
[On/Off]
[Voltage]
[Freq]
Numeric Entry
[0] to [9]
Keys
[.]
[-]
[E]
[-]
[!] [#]
[Enter]
You can immediately change values by directly entering numbers into the Settings field.
Display Layout
This section describes the instrument's display. The default Metering Mode is shown below.
Field
Description
Metering Measurement information (content varies by mode)
Status
Operating status (content varies by mode)
Range
Output range setting: LOW, HIGH, or AUTO
Settings
Settings for VAC, VDC, and Frequency
Interface ERROR and LAN status. Shows IO in rightmost cell when remote control via LAN is operational.
The possible entries for the Status, Range, and Interface fields are shown below.
Keysight AC6800B Series Operating and Service Guide
Description
Toggles the output ON or OFF.
Opens the VAC or VDC (depending on output coupling mode) Settings fields in the Metering
Mode display (See Section 6).
Opens the Frequency Settings field in the Metering Mode display.
Enters a numeric digit.
Enters a decimal point.
Toggles the negative sign.
Specifies an exponent for a numeric entry. For example, 1.23E2 indicates 123.
Deletes the most recently entered digit. When a numeric field is first selected, this key erases the
entire entry.
Increment or decrement a Settings field. No effect on numbers entered under the [Menu] key.
Finishes a numeric entry.
2 User Information
69
Publicité
