Publicité
Les langues disponibles
Les langues disponibles
3 SCPI Programming Reference
Error Code Error Text
+155
Operation conflicts with EXT-AC or EXT-DC program source
+140
LOW RANGE conflicts with existing VOLT[:IMM] setting
+141
LOW RANGE conflicts with existing VOLT:TRIG setting
+142
LOW RANGE conflicts with existing VOLT:OFFS[:IMM] setting
+143
LOW RANGE conflicts with existing VOLT:OFFS:TRIG setting
+150
Overlaid peak value of AC (IMM) and DC (IMM) components is too large
+151
Overlaid peak value of AC (IMM) and DC (TRIG) components is too large
+152
Overlaid peak value of AC (TRIG) and DC (IMM) components is too large
+153
Overlaid peak value of AC (TRIG) and DC (TRIG) components is too large
+160
IMM setting is out of range
+161
TRIG setting is out of range
+162
Overlaid peak value with existing AC (IMM) component is too large
+163
Overlaid peak value with existing AC (TRIG) component is too large
+164
Overlaid peak value with existing DC (IMM) component is too large
+165
Overlaid peak value with existing DC (TRIG) component is too large
+166
LIM:LOW setting is out of range
+167
LIM:UPP setting is out of range
+168
IMM setting value and soft-limits conflict with LOWER<=VALUE<=UPPER condition
+169
TRIG setting value and soft-limits conflict with LOWER<=VALUE<=UPPER condition
+302
Option not installed
+309
Cannot initiate, voltage and frequency in fixed mode
+901
HW failure (DSP DETECT state)
+902
HW failure (DSP VCC state)
+903
HW failure (DSP INPUT state)
+904
HW failure (DSP Communication Failure)
172
Keysight AC6800B Series Operating and Service Guide
Publicité
