Publicité
2
a
1
5
1
2
a
3
5
1
2
CLUTCH (WR426F)
3
4
4
4 - 52
EC4A5000
ASSEMBLY AND INSTALLATION
Push lever
1. Install:
Push lever 1
Bolt (push lever)
10 Nm (1.0 m · kg, 7.2 ft · lb)
NOTE:
Apply the lithium soap base grease on the oil
seal lip.
Apply the engine oil on the push lever.
Fit the seat plate 2 in the groove a of the
push lever 1 and tighten the bolt (seat
plate).
Clutch
1. Install:
Seat plate 1
Clutch damper spring 2
Friction plate 1 [d = ø128 mm (5.04 in)]
3
Clutch plate 4
To clutch boss 5 .
NOTE:
Install the clutch damper spring with the "OUT
SIDE" mark a facing out.
2. Install:
Primary driven gear 1
Thrust washer 2
Clutch boss 3
NOTE:
Apply the engine oil on the primary driven gear
inner circumference.
ENG
Publicité
