Publicité
Å
1
ı
1
2
1
NOTE:
Install the breather hose to the carburetor so
that the hose does not bend near where it is
installed.
Å
ı
1
Carburetor installation
NOTE:
Install the projection a on the cylinder
between the carburetor joint slots b.
1
NOTE:
Install the projection between the carburetor
joint slots.
1
4 - 19
CARBURETOR
19. Install:
Carburetor breather hose 1
Refer to "CABLE ROUTING DIA-
GRAM" section in the CHAPTER 2.
WR426F
WR400F
1. Install:
Carburetor joint 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
2. Install:
Carburetor 1
3. Tighten:
Screw (air cleaner joint) 1
3 Nm (0.3 m · kg, 2.2 ft · lb)
Screw (carburetor joint) 2
3 Nm (0.3 m · kg, 2.2 ft · lb)
ENG
Publicité
