Wacker Neuson 803 Notice D'utilisation page 94

Operation
A
B
Fig. 94: Fastening the retracting seat belt
Fig. 95: Unfastening the retracting seat belt
3-40
The retracting seat belt C is for the operator's safety.
Fastening the retracting seat belt:
Fasten the retracting seat belt as follows before starting the machine:
• Hold belt on buckle latch A and run it slowly and steadily over the hips to buckle B
• Insert buckle latch A into buckle B until it engages audibly (pull test)
C
The retracting seat belt must be tightly in place over the hips!
Unfastening the retracting seat belt:
Unfasten retracting seat belt C as follows:
• Hold the retracting seat belt
C
• Press button D on buckle B
A
Latch A is released by spring pressure
• Unfastening the retracting seat belt
D
B
OM 803 us – Edition 3.7 * * 803b330.fm