Wacker Neuson 803 Notice D'utilisation page 172

Maintenance
Control stand
Exterior of the machine
Engine compartment
5-32
NOTICE
Never use high-pressure cleaners, steam jets or high-pressure water to clean
the control stand. Water under high pressure can
• penetrate into the electrical system and cause short circuits and
• damage seals and disable the controls!
We recommend using the following aids to clean the control stand:
• Damp cloth
• Brush
• Water with mild soap solution
Cleaning the seat belt:
• Clean the seat belt (which remains fitted in the machine) with a mild soap solution only.
Do not use chemical agents as they can destroy the fabric!
The following articles are generally suitable:
• High-pressure cleaner
• Steam jet
Warning! WARNING
Burn hazard due to hot engine parts!
Can cause serious injury or death!
• Stop the engine and let it cool down.
• Wear protective equipment.
WARNING Warning!
Injury hazard due to rotating parts!
Can cause serious injury or death!
• Stop the engine before cleaning
NOTICE
When cleaning the engine with a water or steam jet
• The engine must be cold
• and do not point the jet directly at electric sensors such as the oil pressure
switch.
The humidity penetrating any such sensors causes them to fail and possibly
leads to engine damage!
OM 803 us – Edition 3.7 * * 803b530.fm