Wacker Neuson 803 Notice D'utilisation page 76
Masquer les pouces
Voir aussi pour 803:
- Notice d'utilisation (88 pages) ,
- Notice d'utilisation (198 pages)
Publicité
Les langues disponibles
Les langues disponibles
Operation
Stabilizer blade operation
Fig. 66: Stabilizer blade operation
Changing the width of the stabilizer blade
3-22
WARNING
Warning!
Injury hazard due to operation of stabilizer blade lever!
Can cause serious injury or death.
• Raising the lock lever does not prevent the stabilizer blade from being lowered.
• Keep out of the danger zone of the stabilizer blade.
NOTICE
Lowering the stabilizer blade too deeply into the ground can create too much
resistance
• Slightly raise the stabilizer blade
Position
Lever
1
1
Push forward
2
Pull backward
Information!
Check the position of the stabilizer blade before machine travel.
NOTICE
The machine can be damaged if the telescopic travel gear and the stabilizer
blade are set to different widths (for example when traveling through a door
frame).
• Adjust the stabilizer blade and the telescopic travel gear to the same widths
– see
Grading on page 3-83.
when operating the machine.
Function
Lowers the stabilizer blade
Raises the stabilizer blade
OM 803 us – Edition 3.7 * * 803b330.fm
Publicité
