Wacker Neuson 803 Notice D'utilisation page 62

Operation
Check lists
Start-up checklist
3-8
The checklists below are intended to assist you in checking and monitoring the machine
before, during and after operation.
These checklists cannot claim to be exhaustive; they are merely intended as an aid for you
in fulfilling your duties as a conscientious operator.
The checking and monitoring work listed below is described in greater detail in the follow-
ing chapters.
If the answer to one of the following questions is NO, first rectify the cause of the fault
before the machine can be put into operation.
Check the following points before putting the machine into operation:
No. Question
1 Enough fuel in the tank? (
2 Coolant level OK? (
3 Water drained from the water separator? (
4 Engine oil level OK? (
5 Oil level in hydraulic oil reservoir OK? (
7 V-belt condition and tension checked? (
8 Lubrication points greased? (
9 Tracks checked for cracks, cuts etc.? (
Light system, acoustic warning system, indicator and warning lights OK? (
10
3-27,3-11)
11 Are the lights and the footholds clean?
12 Raise the lock lever (
13 Attachment safely locked? (
14 Engine cover safely closed and locked? (
Especially after cleaning, maintenance or repair work:
15
Rags, tools and other loose objects removed?
16 Seating position adjusted correctly? (
Seat belt fastened
17 (only if the machine is equipped with the rollbar option, and if this rollbar is
raised)? ( 3-37)
18 Anyone in the danger zone of the machine?
19 Indicator lights for engine oil pressure and alternator charge function illuminate.
In case of dual-power operation: hydraulic oil levels of excavator and electro-
20
hydraulic power unit OK?(
5-2)
5-10)
5-5)
5-7)
5-17)
5-15)
5-27)
5-25)
3-62)
3-75)
3-41)
3-28)
3-67)
OM 803 us – Edition 3.7 * * 803b320.fm