Wacker Neuson 803 Notice D'utilisation page 28

Introduction
Fig. 30: Warnings
Fig. 31: Parking the machine correctly
(up to serial no. AI00824) (from serial no. AI00825)
Fig. 32: Warnings
1-18
Meaning (from serial no. AI00825)
Crushing hazard.
• Only operate the machine from the operator's seat.
• Machine operation is only allowed if the rollbar is raised and locked, and if the seat belt
is fastened.
• Machine operation with the rollbar lowered is prohibited.
Operate within stability limits of machine to avoid tipping over.
• Always work ensuring machine stability, do not overload the machine and use only
attachments that have been released by the manufacturer. Always work on firm
ground. Follow the instructions given in the Operator's Manual.
Position
At the front on the engine cover (standard).
On the left on the rollbar (option).
Meaning (up to serial no. AI00681)
Lower the boom and the stabilizer blade to the ground as you leave the machine, remove
the starting key and place chocks on the left and right under the tracks.
Position
At the front on the engine cover
Meaning
Crushing hazard due to unintentional machine operation.
• Before performing maintenance and repair work, stop the engine, raise the lock lever
and remove the starting key.
The key must be kept by the operator.
Position
At the front on the engine cover (standard).
On the left on the rollbar (option).
Attention. Before leaving the machine, lower the boom and the stabilizer blade to the-
ground, stop the engine, raise the lock lever and remove the starting key.
Position
At the front on the engine cover (standard).
On the left on the rollbar (option).
OM 803 us – Edition 3.7 * * 803b110.fm