Wacker Neuson 803 Notice D'utilisation page 132

Operation
Connections for auxiliary hydraulics (stick hose routing option)
T
U
Fig. 169: Auxiliary hydraulics – hose routing on stick
3-78
Auxiliary hydraulics can be connected as required.
If the machine is equipped with the double-action auxiliary hydraulics option, only the flow
direction of the hydraulic oil changes.
Connection Stick (left)
Return line
T
U
Information!
Follow the instructions in the Operator's Manual of the attachment manufac-
turer for connecting the auxiliary hydraulics to an attachment.
Connect and disconnect as follows:
Park the machine on level and horizontal ground.
Extend the stick cylinder halfway through.
Stop the engine.
Release the pressure on the operating hydraulics
– see chapter 3.19 Pressure release on the auxiliary hydraulics on page 3-75.
The attachment couplings can be connected.
Raise the lock lever.
Remove the starting key.
Stick (right)
Pressure line
OM 803 us – Edition 3.7 * * 803b340.fm