Wacker Neuson 803 Notice D'utilisation page 77

A
Fig. 67: Changing the width of the stabilizer blade
A
Fig. 68: Changing the width of the stabilizer blade
A
Fig. 69: Changing the width of the stabilizer blade
A
Fig. 70: Changing the width of the stabilizer blade
OM 803 us – Edition 3.7 * 803b330.fm
Reducing the width of the stabilizer blade
Raise the stabilizer blade to about 1 – 2 cm (about 0.4 – 0.8 in).
Pull out pins A on either side.
Turn in the stabilizer blade extensions B on either side.
Insert pins A on either side.
B
Increasing the width of the stabilizer blade
Raise the stabilizer blade to about 1 – 2 cm (about 0.4 – 0.8 in).
Pull out pins A on either side.
Turn out the stabilizer blade extensions B on either side.
B
Insert pins A on either side.
Operation
3-23